The short answer

We produce private-label compression socks from 500 pairs per design in three graduated classes: 8–15, 15–20 and 20–30 mmHg measured at the ankle. Construction is a nylon-elastane circular knit with graduated compression and a reinforced heel; pressure is verified per order and test reports are issued with the shipment. Twenty-one compression styles are in the current catalogue. The class you choose should come from the use case, not from the price list.

The three pressure classes and who they are for

ClassAnkle pressureTypical useBuyer
Mild8–15 mmHgTravel, long sitting, everyday comfortRetail, gift, airline amenity
Moderate15–20 mmHgRunning, nursing, standing professionsSports brands, workwear, healthcare supply
Firm20–30 mmHgRecovery, high-impact sport, clinical supportSports medicine, specialist retail

Graduated compression means the pressure is highest at the ankle and decreases up the calf — typically 100% at the ankle, around 70% at mid-calf and 40% at the top. A sock that is tight everywhere is not a compression sock; it is a tight sock. Ask any supplier for the pressure profile, not just a single number.

What has to be measured, and by whom

Compression claims are testable and therefore defensible — or not. We verify pressure on a per-order basis with a compression testing instrument (HOSY or Salzmann-type), at four points along the leg, and issue the report with the shipment. Three things follow from that:

  • The class on the label must match the report. If the report says 14 mmHg at the ankle, "20–30 mmHg" on the pack is a false claim in every market we ship to.
  • Elastane content and knit structure decide the class. Typical mixes run 18–28% elastane with textured nylon; more elastane alone does not raise the class — the stitch density and the graduated knit do.
  • Wash retention matters. Pressure decays with washing; specify the retention you will accept after 10 cycles and have it tested if the claim matters to your channel.

Claims language that keeps you out of trouble

Compression socks sit close to medical-device territory. In the EU, a product claiming to prevent or treat a condition can fall under the Medical Device Regulation; in the US, the FDA treats some compression garments as Class I devices. Broadly safe: describe the pressure class, the graduated profile, the intended use ("for travel comfort", "for running recovery") and the fit. Broadly unsafe: "treats varicose veins", "prevents DVT", "medical grade" without registration.

If your channel requires a device claim, tell us at brief stage — the construction is compatible, but the labelling and technical file responsibilities change, and those sit with the brand owner in most markets.

Sizing is the real return-rate driver

Compression cannot be sold in four sizes. The standard is a size run built on ankle and calf circumference plus leg length — typically four to six sizes, each with a measured fit range. Our spec sheet asks for both circumferences because a sock sized only on shoe size will be wrong for a large part of the market, and a wrong-fitting compression sock is a complaint, not a reorder.

Cost structure and minimums

Unit cost is driven by elastane percentage, the number of size-specific knit programmes, and the testing. Sizes in a compression programme are not graded from one pattern the way a casual sock is — each size has its own knit programme, which is why a four-size compression run costs more than a four-size casual run at the same quantity.

Entry minimum: 500 pairs per design (across the size run), samples 7–10 days, bulk 18–28 days after approval. Add roughly a week when per-order pressure testing is included.