Resources · Construction Reference

Yarn count and GSM: how sock weight is actually set

Two numbers decide how heavy a sock is and how it feels: the yarn count (how fine the yarn is) and the fabric weight (how much yarn per square metre). Buyers usually quote only one, and then wonder why the sample feels wrong.

The short answer

  1. Ne counts 840-yard hanks per pound; Nm counts metres per gram. They are the same fact in different units: Nm ≈ Ne × 1.693.
  2. GSM is grams per square metre. Buyers usually think in grams per pair — for a standard crew, one pair is roughly 0.07–0.09 m², so 250 GSM lands near 20 g/pair.
  3. Neither number is a quality grade. GSM measures weight; yarn count measures fineness. Loop density and finishing decide the rest.
  4. Across the 317 styles in this catalogue, 186 publish a composition: cotton appears in 145, nylon in 147, spandex in 147, merino in 4, silk in 3.
  5. Specify yarn count, grams per pair and needle count together. Any two without the third can be met by cheating.

Three ways of describing the same yarn

Yarn fineness is expressed differently by different parts of the trade, which is where most specification arguments start.

  • Ne (English cotton count) — the number of 840-yard hanks in one pound. Higher Ne means finer yarn. A Ne 30 combed cotton is finer than a Ne 20.
  • Nm (metric count) — metres per gram. Nm 50 means one gram of yarn measures 50 metres. The conversion is fixed: Nm = Ne × 1.693, so Ne 30 is Nm 51.
  • Denier / decitex — used for filament yarns, mainly nylon and spandex. Denier is grams per 9,000 metres: 70 denier nylon is finer than 100 denier. Spandex is usually quoted as 2/70 or 2/100 — two plies of 70 or 100 denier.

A sock is almost always a blend, and each component is quoted in its own unit. That is why a composition line reads like "combed cotton Ne 30 / nylon 70D / spandex 2/70" rather than as a single number.

GSM, and why buyers should think in grams per pair

GSM is a fabric weight per unit area. It is the standard unit in woven textiles and a clumsy one for socks, because a sock is a shaped tube rather than a flat piece of cloth. The practical unit is grams per pair, and the two convert with the area of the sock:

A standard crew sock covers roughly 0.07–0.09 m² of fabric per pair, counting both socks. At 250 GSM that is 18–23 g per pair. A no-show liner at 0.03 m² and 150 GSM is under 5 g. A knee-high boot sock at 0.13 m² and 450 GSM passes 55 g.

Where a supplier quotes GSM without stating the sock length, the number cannot be checked. Ask for grams per pair at a named size — that is measurable on a kitchen scale and cannot be fudged.

Weight bands by sock type

Grams per pair are for a mid-size crew unless the length is stated. Yarn counts assume a cotton-dominant blend; wool and synthetic blends run one step coarser.

Sock typeg/pairGSM (approx.)Yarn countNeedle count
No-show liner4 – 8 g120 – 160Ne 40 – 60168N – 200N
Everyday crew22 – 32 g200 – 260Ne 20 – 30144N – 168N
Business / dress18 – 26 g180 – 230Ne 28 – 40168N – 200N
Athletic crew, plain28 – 40 g240 – 300Ne 16 – 24132N – 144N
Sports crew, half terry40 – 55 g300 – 380Ne 12 – 20120N – 144N
Full-terry sports55 – 75 g380 – 460Ne 10 – 1696N – 132N
Work / boot70 – 110 g420 – 600Ne 6 – 1096N – 108N
Merino hiking50 – 90 g300 – 420Ne 12 – 20132N – 168N
Compression, 20–30 mmHg20 – 40 g180 – 260Ne 30 – 40 + 2/70 nylon168N – 200N

A knee-high is 1.4–1.7× the weight of the same construction in a crew. Over-the-calf and thigh-high scale further. Always compare like length to like length.

Why two socks at the same GSM feel different

GSM is a weight, not a hand. Two crews can weigh 45 g each and feel nothing alike, for five reasons:

  • Terry versus plain. Terry packs the same weight into loops standing off the fabric, so a 45 g terry feels thick and a 45 g plain feels thin. This is the largest single effect and the one most often missed in a specification.
  • Ply. Two-ply yarn of Ne 40 behaves differently from single Ne 20 at the same total weight — softer surface, better abrasion, higher cost.
  • Loop density. The same weight knitted at a tighter gauge gives a denser, firmer fabric; at a looser gauge, a softer, airier one.
  • Fibre. Merino at 300 GSM insulates differently from cotton at 300 GSM, and both differ from acrylic.
  • Finishing. Boarding pressure and time flatten the loop and change the hand measurably. Mercerized cotton is a chemical change on top of that.

The practical consequence: never approve a specification from GSM alone. Approve from a physical sample plus a written construction — yarn count, ply, terry zones, grams per pair at a named size.

What the compositions in this catalogue actually look like

Not every style publishes a composition, which is itself worth knowing. Of the 317 styles in the current catalogue, 186 carry a material specification. Across those 186:

  • Cotton appears in 145 styles — the default fibre for everyday, athletic and dress ranges.
  • Nylon appears in 147 and spandex in 147 — almost always together, as the strength-and-recovery pair that lets a cotton sock hold its shape.
  • Merino appears in 4 and silk in 3 — the fine end of the range, where the yarn cost dominates the unit price.

That distribution is not an accident: a cotton sock without nylon and spandex wears through at the heel and loses its shape at the cuff. A composition of "100% cotton" on a sock is a claim worth checking against the heel and cuff, where the elastane usually sits.

What to put in the RFQ

  • Yarn count and ply, or a reference sock the mill can reverse-engineer.
  • Grams per pair at a named size, with a tolerance. ±5% is a normal commercial tolerance; ±2% is achievable and costs more.
  • Terry map — full terry, half cushion, heel and toe only, or plain.
  • Composition with percentages, and which fibre sits where. A "cotton-rich" sock with no nylon at the heel is a different product from one with it.
  • Certification scope, if any — OEKO-TEX, GOTS, RWS and GRS change the yarn that can be used, and therefore the achievable weight and the price.

Needle count and its effect on surface and yarn ceiling is covered in needle count and gauge; the fibre-by-fibre comparison sits in yarn and materials.

Yarn count and weight questions

What does GSM mean for socks?

Grams per square metre of knitted fabric. Because a sock is a shaped tube, buyers normally work in grams per pair instead. A standard crew covers roughly 0.07–0.09 m², so 250 GSM is about 20 g per pair. Ask for grams per pair at a stated size — it can be checked on a scale.

Is a higher GSM sock better?

Not necessarily. GSM measures weight, not durability or comfort. A 400 GSM full-terry sports sock and a 200 GSM fine-gauge dress sock are both correct for their purpose. A high GSM reached by over-feeding coarse yarn gives a stiff sock that pills and loses recovery.

What is the difference between Ne and Nm yarn count?

Ne counts 840-yard hanks per pound; Nm counts metres per gram. The conversion is fixed at Nm = Ne × 1.693, so Ne 30 is Nm 51. Suppliers in different regions default to different systems, which is why a specification should state which one it uses.

How do I convert grams per pair to GSM?

Divide grams per pair by the fabric area of the pair. A crew at 20 g per pair over 0.08 m² is 250 GSM. The area changes with length and size, so the conversion only holds when both numbers refer to the same style and size.

What is a normal yarn count for a cotton crew sock?

Ne 20–30 single, or Ne 40 two-ply for a softer, more abrasion-resistant surface at a higher cost. Below Ne 16 the sock reads as heavy and casual; above Ne 40 it becomes a fine-gauge dress construction and needs 168N or finer needles.

Give us the weight and the hand you want.

Send grams per pair and a reference sample; we will come back with the yarn, the needle count and the price at two quantities.